Xcalibur Restore Finish Coating has been specially formulated by Solution Research & Development to restore and enhance the appearance of our Xcalibur High Gloss Coating. It utilises Advanced Polymer Adhesion Technology© and molecularly bonds with Xcalibur High Gloss Coating to repair visual damage from scuffing and foot traffic. It can also be used as a stand-alone gloss floor coating when the long-term performance and durability of a coating such as Xcalibur High Gloss Coating is not required. In this instance strip the floor back fully to remove the existing floor coating. Then apply a maximum of three coats of Xcalibur Restore Finish Coating.

Directions for use:
Deep scrub clean the floor finished with Xcalibur High Gloss Coating using a dilution of Xcalibur Maintenance cleaner mixed at 1:50. Use a low speed rotary or Oscillating pad machine fitted with a blue scrub pad and agitate the floor ensuring even application. Recover the dirty solution and fresh water rinse the floor once. Allow to dry thoroughly, and then apply 2 coats of RTU Xcalibur Restore Finish Coating using a clean lint free synthetic finish flat mop.
Drying Times:
Touch dry and re-coat in: 1 hour Suitable for light foot traffic within: 4 hours Normal foot traffic and normal wear within: 8 hours
It can be buffed with an UHS Burnisher fitted with the appropriate polishing pad after 8 hours or as and when required. Thereafter maintain by cleaning with Xcalibur Neutral Cleaner daily, and once a week clean using Xcalibur Maintainer. Burnish as desired.