Our project will help you to make the best choice and to buy quality goods for a low price. Here you will find a comprehensive list of reliable e-retailers.
Cables, adapters, splitters, sockets, plugs
Multipair audio cable in 20 channel format with 1/4" and XLR plugs designed to send signals from a source to a remote mixer & to return line level signals back to the stage to drive a P.A. system. (16 Cchannel shown)
Price: £329.24Buy!
Cables, adapters, splitters, sockets, plugs
Multipair audio cable in 20 channel format with 1/4" and XLR Plugs designed to send signals from a source to a remote mixer & to return line level signals back to the stage to drive a P.A. system.100'; 16 sends, 4 XLR returns.
Price: £329.24Buy!
Cables, adapters, splitters, sockets, plugs
Multipair audio cable in 16 channel format with 1/4" and XLR plugs designed to send signals from a source to a remote mixer & to return line level signals back to the stage to drive a P.A. system. 100'; 12 sends, 4 1/4" returns.
Price: £293.66Buy!
Cables, adapters, splitters, sockets, plugs
Four Director DIs in one convenient 1U rack package. The MultiDirector is the touring sound standard for passive DIs.
Model # - MLTDIR
Impedance Ratio (input to output): 133:1
Level Change (input to output): -20dB (padout), -40dB (pad in)
Frequency Response: 20Hz-20KHz В±1dB
Price: £156.78Buy!
Cables, adapters, splitters, sockets, plugs
Features include:
1/4" parallel wired in/out jacks
Ground Lift switch to help eliminate hum and buzz
30dB pad switch for selecting between line/instrument or speaker level input signals
Switchable high cut filter to eliminate amplifier noise
Uses Whirlwind's TRHL-M transformer with metal shield
Price: £45.19Buy!
Cables, adapters, splitters, sockets, plugs
Each section features:
1/4" parallel wired in/out jacks
Ground Lift switch to help eliminate hum and buzz
-20dB pad switch for connection to "hot" input signals
Uses Whirlwind's TRHL-M transformer with metal shield
The input and output grounds of each section are isolated from each other. This allows the DIRECT2 to be used as if it were two completely separate DIs without fear of creating ground loop interaction.
Price: £84.42Buy!
Cables, adapters, splitters, sockets, plugs
Built rugged on the inside and outside, this is the world famous DI found in pro systems everywhere. The IMP 2 converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
Features include:
1/4" parallel wired in/out jacks
Ground Lift switch to help isolate hum and buzz
Uses Whirlwind's TRHL transformer
Price: £29.55Buy!
Cables, adapters, splitters, sockets, plugs
Technical Info
Input Impedance: 20 kOhms
Output Impedance: 150 Ohms
Frequency Response: 20Hz-20kHz +/- 1 dB
Level Change: -20 dB (input to output, pad switch set to zero dB)
Pad: 3 position, provides 0 dB, -20 dB, -40 dB additional attenuation
Price: £18.06Buy!