Our project will help you to make the best choice and to buy quality goods for a low price. Here you will find a comprehensive list of reliable e-retailers.
Brakes
Kevler Performance pads (picture may not be accurate) - Work with all rotors including Brembo OEM and slotted - Highest quality materials for the best performance, reduced stopping distance, and low dust. The friction material in the Rotex brake pads blends Kevlar with metallic soft steel wire and powdered sponge iron for maximum heat transfer, and silver virgin graphite for smooth quiet performance. This 60% metallic blend reduces ...
Price: £50.30 Buy!
alfissimo.com
Brakes
*Back ordered- 1-2 weeks (11/18/08) NO BLACK DUST PAD ROTEX-Kevler-Semi-metalliac Performance pads - Work with all rotors including Brembo OEM slotted - Highest quality materials for the best performance, reduced stopping distance, and low dust. The friction material in the Rotex brake pads blends Kevlar with metallic soft steel wire and powdered sponge iron for maximum heat transfer, and silver virgin graphite for smooth quiet performance. ...
Price: £56.67 Buy!
Brakes
ATE Power Pad Front Pad set for Alfa Romeo 164. - * Constant friction and fading resistance to over 550 °C /1022°F- satisfies even racing requirements - * Long life - * ECE-R-90 approval - * A combed back plate enhances the mechanical bond between fricative material and back plate, ensuring they do not separate even under extreme pressure and stress - * So-called anti-noise shims for low braking ...
Price: £39.16 Buy!
Brakes
Vintage Weinmann Drilled Road Bike Brake Levers Non-Aero with Hoods and Cables. The hoods are dried out, but they still look good for their age. They will probably crack if used. The band clamps are 22.2mm to fit steel handlebars. The levers are both marked 7 78 inside and were probably made in 1978. Both levers have grey plastic cable adusters. There are some marks on the levers from dried up masking tape that was holding them together. ...
Price: £44.57 Buy!
Brakes
Schwinn Approved 10 Speed Brake Lever Set with Safety Levers. The band clamps are 23.5mm. Included in this set are right and left brake levers with safety levers, 2 Dia-Compe cable hanger yokes, front and rear Schwinn stamped grey brake cables with alloy cable adjusters to fit the levers. The cables are marked Schwinn 09 24 82. Other parts are marked (XX) 81 or (XX) 82 and Japan. They are marked Wide on the back of the levers. I assume ...
Price: £47.75 Buy!
Brakes
Road Bike Brake Safety Lever Kit. Made for old road bike levers that did not come with safety levers. Install by removing the band clamp bolt and the round barrel (usually red, yellow, or silver) that the bolt goes through. Then just insert the new safety levers and tighten the band clamp bolt. Made in Taiwan. Vintage - 1980s Condition - New in original package Quantity Available - 1
Price: £3.18 Buy!
Brakes
Dia-Compe Drilled 10spd Non-Aero Brake Levers. They fit old 10spd drop bars. Bar clamp diameter is 22.2mm. Also included with each pair (not in picture) are two Dia-Compe 23.5 band clamps for alloy handlebars. Looking at the 1986 catalogue online, it appears that these are model # 144H. They are marked Dia-Compe Regular on the inside of the levers. Also marked Japan, 0585, 0685, 0583, 0582 on various parts/levers. Vintage - 1980s. ...
Price: £15.92 Buy!
Brakes
Old 10spd Road Bike Lever Left Side Only w/Safety Lever. These came from an old store I bought out years ago. I assumed they were pairs. I was wrong. Only left hand sides. Maybe someone needs them for parts. Band clamp is marked 22.2 & 23.8. Made of aluminum alloy. Condition - Never been installed. Vintage - 1980s Quantity Available - 32
Price: £0.64 Buy!
